To put the notion of “people-centered development” into effect, Nanjing Municipal Bureau of Planning and Natural Resources has organized a series of competitions themed “Center on People, Design for Cities” since 2018. Focusing on public facilities in urban space, the serial competitions publicly solicit design proposals to create fine public spaces and thus improve the functional quality of cities. Six widely influential events have been held so far, including the Competition for Blood Donation Facilities in Key Areas of Nanjing, the Competition for Nanjing Metro Station Entrance and Exit, the Competition for Micro Stations in Jiangsu Horticultural Expo Garden, the Maigaoqiao Street Covered Bridge Design Competition, the Competition for Landscape Facilities in Nanjing Green Expo Garden, and the “Viewing Pavilion · Micro Building” Design Competition for the Vertical Environment-Community Units in Nanjing. The seventh competition carries on the efforts on small and micro-renewal of urban gaps and space so as to improve people’s livelihood and give expression to local culture.
Under the theme of Micro Settlement-Light Construction,in response to people’s needs for suburban or countryside experience in the post-COVID era, this competition spurs reflections on the outdoor leisure lifestyle – for instance, the emerging trend of camping – which is gaining popularity among China. Participants are encouraged to renew their understanding of contemporary urban space and life and design it with the strategy of landscape urbanism and the notion of “environment-community unit”. It is hoped that our efforts can crystalize into a demonstrative site for post-COVID new lifestyles in Nanjing’s public urban landscape, which are also conducive to economic growth.
This competition is open to participants at home and abroad, and the winning proposal will be implemented. Hopefully, through consultation, joint contribution and sharing, this event can offer an example of small and micro-renewal of post-COVID public urban landscape, facilitate urban renovation and ecological remediation, and thus enhance the gratification and contentment of citizens.
Members of the Academic Steering Committee for this competition include: Prof. Per Olaf Fjeld, Professor Emeritus and former President of the Oslo School of Architecture and Design (AHO), Prof. Christian Kerez at ETH Zurich, Prof. Yoshiharu Tsukamoto at Tokyo Institute of Technology and lead architect of Atelier Bow-Wow, Prof. Jesús Ulargui Agurruza at U.P.M E.T.S.A.M., Prof. Wang Weijen at Department of Architecture, Hong Kong University and lead architect of Wang Weijen Architecture, Prof. Zhuang Shen at Shanghai Jiaotong University, lead architect of Atelier Archmixing, and Prof. Ge Ming at Southeast University. These experts are invited to formulate the competition task and work as the jury.
Nanjing Municipal Bureau of Planning and Natural Resources
People’s Government of Jiangning District, Nanjing
The Economic and Technological Development Management Committe of Jiangning District,Nanjing
Jiangning Branch of Nanjing Municipal Bureau of Planning and Natural Resources
Prof. Per Olaf Fjeld
Prof. Christian Kerez
Prof. Yoshiharu Tsukamoto
Prof. Jesús Ulargui Agurruza
Prof. Ge Ming
Prof. Wang Weijen
Prof. Zhuang Shen
Nanjing Creative Design Center
July 15, 2022—October 31, 2022, 24: 00 (deadline for design submission)
Site Survey and Q&A
Site surveys and Q&A sessions will be organized in August 2022.
From November to December 2022, two rounds of jury review will be convened. The preliminary review will determine the shortlisted entries, and the final review will determine the winners of the first, second and third prizes.
In December 2022, the shortlisted entries will be announced for online voting.
From December 2022 to January 2023, the competition results will be announced.
Commendation and Exhibition
From January to February 2023, the winners will be publicized and commended, and the winning proposals will be displayed in a dedicated exhibition.
This competition is open to all individuals and organizations in China and abroad. Any design organizations, independent designers, students, and individuals of any other occupation are welcome to participate.
From July 15th, 2022, contestants shall send “Micro-Settlement” to the official WeChat account of the competition organizing committee, named “Nanjing Creative Design Center” (WeChat ID: NDC-CHINA), or visit the official website of Nanjing Creative Design Center (http://www.ncdc.org.cn/) to download the pertinent materials. The entry form and design plan shall be sent together to email@example.com with subject of “Micro-Settlement · Light Construction
*Contestants can be individuals, teams, or organizations. Design plans that have already been implemented, published, or involved in other competitions are not eligible for participation.
Design Targets and Requirements
The site is located in Jiulong Lake Park at the northern end of Jiulong Lake in Jiangning District, Nanjing. With beautiful scenery and plentiful trees, it is now one of the most popular camping destinations in Jiangning. Under the theme of “Micro-Settlement · Light Construction”, two plots are designated as the design targets. You can base your proposal on EITHER of the two plots, designing a set of structures and a camping site, providing facility services and management.
a. Micro-Settlement, Light Construction
Micro-settlement = a set of structures + a camping site.
Design Objective: Provide services and sites for rest, camping, and other activities in the park by means of “micro-settlement”.
Design a set of light-constructed structures, including more than three single buildings or units.
Design a public place and come up with a suitable theme for public activities. Meanwhile, provide support for camping activities, and arrange at least 30 sites for tent put-up (No need to design the tents, but instead, provide flat, small sites of appropriate size to accommodate the tents.).
Site plan drawing requirements: You need to formulate an overall planning of the “micro-settlement” and draw the site plan accordingly.
Construction requirements: Consider the cost and adopt the method of light construction to shorten the construction time and reduce impacts on the site. The existing trees shall not be cut down; avoid excessive influence on the current environment.
The settlements should be orderly, lively, and concerted with each other. Functionally, the settlements should offer an ascending place, maintain a good relationship with the surroundings, and highlight characteristics. It is preferable that a prototype, which is suitable for popularization, can be extracted out of the settlements as designed.
b. Architectural requirements
Function: First of all, satisfy basic service functions such as equipment rental, sales, medical treatment, lookout, etc. Contestants can devise other functions, if any, such as tent put-up, morning yoga, open-air cinema, concerts, etc. The structures should provide both indoor space and some semi-outdoor space.
Height limit: from the highest point of the structures to the ground, the height cannot exceed eight meters.
Area: Devise more than three single buildings or units as supporting facilities for public services. The smallest one should cover 15 square meters, and the overall floorage should be approximately 150 square meters.
c. Site conditions
Located in the park of the northern end of the Jiulong Lake, Jiangning District, each plot covers an area of over 6,000 square meters.
Plot A: by the woods
Located by the woods; waterfront area on its eastern side; flat terrain.
Plot B: turf slope
Located by the lakeside turf slope; varied terrain.
Contents: A brief description (300 words maximum); Site plan; A complete set of drawings that clearly manifest your design intent (e.g. plan, elevation, section, overall perspective views, detail drawings of a part, etc.). No restriction on the means of manifestation; It is forbidden to show on the drawing any information as to the identity of the designer. Nonobservance will lead to disqualification.
Layout Requirements: Format: Electronic file, either PDF or JPG；Size: 841mm (W) * 1189mm (H)；Precision: not less than 300dpi；Page: One page in vertical layout.
Judging & Awards
Judging & Awards
From November to December 2022, two rounds of jury review will be convened. The preliminary review will determine the shortlisted entries that are eligible for online voting and the final review. The final review will determine the winners of the first, second and third prizes.
In December 2022, the shortlisted entries will be announced for online voting. Based on the voting results, “Award of Online Popularity” will be conferred. This award is also obtainable to winners of the first, second and third prizes.
1 first prize winner, bonus: 100,000 yuan (about US$14,820);
3 second prize winners, bonus: 50,000 yuan (about US$7,400) for each;
6 third prize winners, bonus: 20,000 yuan (about US$2,960) for each;
6 winners of Award of Online Popularity, bonus: RMB 5,000 (about US$740) for each.
Note: The bonus amounts above are pre-tax.
The winning designers and plans will be announced and commended;
Selected award-winning plans will be carried out for construction.
Certificates will be conferred upon the winning organizations and individuals.
The winning designers will be included in the designer pool of Nanjing Municipal Bureau of Planning and Natural Resources and recommended for other urban design projects.
Contestants must truthfully fill in personal information and meet all the requirements of this event, if any. Organizational contestants must have the entry form stamped with the official seal and submit a scanned copy of the business license (also stamped). Individual contestants must sign the entry form and submit a scanned copy of the personal ID card (also signed). Incomplete submission will result in disqualification. The entry form shall be submitted digitally as a scanned copy or photo.
Contestants should complete the design task as required. Each contestant can only submit one proposal. The submitted proposal must be complete; incomplete proposals will be deemed invalid. Submission of multiple proposals will result in disqualification.
Contestants should guarantee the originality of the submissions. Verified plagiarism will result in disqualification.
The copyright of the winning entries is jointly possessed by the designer and the organizing committee. During the follow-up construction, the detailed design of the working drawings will be entrusted to the original designer as a priority choice, or alternatively, to a third-party institution. The copyright of the non-shortlisted entries belongs to the designer.
The organizing committee reserves the right of final explanation for the competition rules.
Hotline: 025-58505301 *From Monday to Friday, 9:00-17:30
Wuhan East Lake High-Tech Development Zone (also known as “East Lake High-Tech Zone” and “Optics Valley of China (OVC)”), was founded in 1988 and successively approved by the state as one of the first National High-Tech Zones, second National Innovation Demonstration Zone and China (Hubei) Pilot Free Trade Zone – Wuhan Area, and has been recognized as a National Optoelectronic Information Industry Base, National Bio-industry Base and Talent Base for Central State-owned Enterprises (SOEs), as well as being included in the first batch of National Innovation and Entrepreneurship Demonstration Bases.
Optics Valley Central City is under accelerated development and construction into a core carrier of urban functions for East Lake High-tech Zone. Different from its north core zone, its south core zone is planned to occupy an area of 3.24 km2, becoming an international community serving the development of innovation and entrepreneurship, sports and leisure, and culture and entertainment. The overall urban layout of the south core zone is a continuation of the urban layout of Optics Valley Central City, namely “small blocks and a dense road network” with a clear spatial sequence and axis. It will be developed into a continuous, multi-level, spatially varied green and open community based on existing hills and rivers connecting with major public buildings in the Zone, and organically integrating with a bus + slow traffic complex 3D traffic system, thereby providing a good development framework for urban invigoration, innovation convergence and future city cultivation.
The construction of East Lake Science City Innovation Industrial Park is now planned so as to further tap the potential of regional development and create an open, diversified and dynamic system that serves business, commerce and innovative industries.
The East Lake Science City Innovation Industrial Park Project is planned to be located in the south core zone of Optics Valley Central City at the intersection of two main roads, Guanggu 5th Road and Gaoxin 4th Road, adjacent to the complex of sports parks and stadiums in the north and the lotus pond park and Central Ecological Corridor in the west, making it the most important node in the urban axis and vibrant green ring, and a landmark in the Zone’s skyline. Metro Line 19 and Line 29 transfer hubs are planned to be constructed in the southeast of the base to facilitate convenient public transportation access.
The project is oriented as an international-level complex serving innovative industries and integrating business, office and culture. It is highly forward-looking and innovative in its multi-functional complex design and integration of shared space, and will reach the mainstream level of international intelligent office property in an all-round way.
The project will consist of two plots in south and north respectively, with a planned total area of 3.4 hectares, designed to become an urban complex including two super high-rise tower buildings (no higher than 150 m and 240 m in height respectively). The building area capacity of the project will not exceed 183,300 m2, with no more than 21,000 m2 for underground commercial space and parking lots. RMB 1,588 million is planned to be invested in the project.
Spatial relationship with Optics Valley Central City
Spatial relationship with urban design framework of south core zone
Design scope and surrounding planning
Surrounding traffic conditions
Full consideration of base characteristics and advantages, and introduction of urban design thinking
The relationships among development intensity, spatial organization and environmental quality are studied to ensure harmonious coordination between the urban complexes of various architectural volumes, and between the urban complexes and surrounding buildings and environment. The different functions and proportions of the project are reasonably allocated to avoid mutual interference between the pedestrian flow and traffic stream in business, hotel and office areas, and maximize the economic value of both the land and commercial operation. Dynamic and open blocks will be created, the design of the interfaces between streets, commercial spaces and pedestrian spaces will be strengthened, and a continuous public pedestrian street system will be built. Outdoor public spaces will be opened in an appropriate manner and unobstructed multi-dimensional city vision from the ground floor, near-ground floor, middle of high-rise tower and roof will be created, demonstrating cultural characteristics and shared resources.
Reasonable functional zoning to create humanized and flexible office space
On the basis of an understanding of new economic forms and social willingness, a future-oriented, people-oriented and high-quality office space will be created and adapted to the flexible needs of enterprises for space utilization and irregular function transformation, thereby realizing personalized development and free combination. Low-energy and sustainable green ecological technology will be combined in order to adjust the microclimate and create a healthy and pleasant space for work and communication. The study of problems in existing office models and the development of high-rise offices will be encouraged, and innovative ideas and technological breakthroughs in design will be presented.
Overall consideration of balance among design innovation, implementation and later operation
Appropriate technical solutions will be selected, balance will be struck among structural form, architectural form, use function and space experience, and excessively complex and difficult construction forms that lead to out-of-control project progress and costs will be avoided.
Land Planning and Design Conditions
See the design specifications for details.
Main contents: project planning (market analysis, product orientation and portfolio, development strategy and later operation strategy suggestions) and main and supporting function designs (office buildings, hotels, businesses, parking garages and equipment rooms). See the design specifications for details.
This solicitation adopts a global open application method. All design agencies with relevant experience in the design of super high-rise public buildings (built or under construction in the past ten years) in China and abroad may apply for participation.
The design agency (applicant) must have a legally registered and valid business license. Different agencies with the same responsible person or in a holding or management relationship are not permitted to apply simultaneously.
Consortiums consisting of up to three members are permitted to apply. However, the lead agency and respective responsibilities of the consortium should be specified in the consortium agreement. Parties to a consortium may not participate under their own name or form another consortium with other design agencies.
Applications made by individuals and individual groups will not be accepted.
Applicants should complete the application form (click hereto download the application form, password: bzzx), then stamp it, scan it and send it to the email address firstname.lastname@example.org to access the design specifications. Please refer to the design specifications for requirements for the completion of credit certificates.
This solicitation is divided into three phases: “application and pre-qualification”, “concept design review” and “final review”:
Application and pre-qualification
After applicants submit their application forms, the undertaker will issue the detailed design specification and basic information package of the project; after applicants submit their credit certificates and conceptual proposals, the undertaker will organize a pre-qualification meeting for the preferential selection of five unranked shortlisted design agencies.
Concept design review
The shortlisted design agencies should continue to complete their concept designs; the undertaker will organize a Q&A meeting and site survey as the case may be, and organize a proposal review meeting for the preferential selection of three unranked design proposals recommended to the sponsor for further decision.
The sponsor will organize a final review meeting to rank the three design proposals on the basis of a report made by the chief architects.
RMB 500,000 (about US$73,900) each in design compensation for the five design agencies shortlisted in the pre-qualification phase, another RMB 4.5 million (about US$665,700) design fee (RMB 5 million (about US$739,700) in total) for the design agency ranking first among the three design agencies in the final review phase, and another RMB 1 million (about US$147,900) (RMB 1.5 million (about US$221,800) in total) and RMB 500,000 (about US$73,900) (RMB 1 million (about US$147,900) in total) for the design agencies ranking second and third respectively. The above fees are tax-inclusive.
This solicitation will last from July 2022 to October 2022. The specific schedule is as follows:
Note: The above times are subject to China Standard Time (CST).
Any major adjustments to the schedule will be announced separately.
Design Document Requirements
1. Prequalification stage
Credit Certificate Document
Including the profile of design institution, business license or effective business registration document, consortium agreement, projects list and relevant proofs, the design team, resumes of chief architect.
Two display boards in A0 size (portrait), one automatic presentation file (no more than 5 minutes), and brief design description(no more than 1000 words), the contents of which include but not limited to the following: · Project interpretation, design ideas and related analysis graphics; · General layout plan with major economic and technical indicators; · Major floor plans, elevations and sections; · Design concept renderings; · Other necessary analysis diagrams and drawings that express the design intention.
2. Concept Design Review Stage
Six display boards in A0 size (portrait), ten atlas in A3 size, one presentation file, and 3D model, the contents of which include but not limited to the following:
·Design concept description and related technology analysis;
·Major economic and technical indicators;
·Analysis diagram of concept and scheme that express the conception process;
·General layout plan;
·Major floor plans, elevations, sections and perspectives;
·Schematic diagram of structures, façade materials, mechanical and electrical equipments;
·Business planning, operational strategy, and engineering construction investment estimation;
The design fees for this solicitation will all be paid in RMB in China. Any foreign design agency or individual not supporting such collection in RMB may authorize legal and independent legal persons in China to collect such payment on their behalf.
Design agencies have the right of authorship to their deliverables. With the permission of the sponsor, such agencies can evaluate and display the deliverables mentioned above through media, professional magazines, books or other forms. The sponsor, undertaker and project construction unit have the right to use the solicited proposals in consultation on this project, and may use such proposals in whole or in part during the proposal adjustment and integration of this project, or modify them; furthermore, the sponsor, undertaker and project construction unit may also print, publish and exhibit all the application results, and evaluate, display and publicize such results through the media, professional magazines, books, periodicals or other forms.
Design proposals should be original and not previously published in any form. Neither the design proposals nor any material used to create the entries should infringe on any third-party copyright, trademark, patent or other rights. In the event of such infringement, the design agencies must be liable for all disputes or legal liabilities arising therefrom, and compensate for any losses suffered by the sponsor.
The design agencies must abide by the relevant confidentiality regulations of China, properly keep the drawings and materials provided by the sponsor, and protect their intellectual property rights. Without the permission of the sponsor, no drawing data or design results may be transferred to any third party or used in projects other than this project.
Design agencies participating in this event will be deemed to have acknowledged all the terms of this announcement.
Only the laws and regulations of the People’s Republic of China are applicable to this event itself and all documents in connection with it.
The sponsor reserves the final right to interpret the rules of this event.
Organization and Contact Information
Sponsor: Wuhan Optical Valley Central City Construction and Investment Co., Ltd.
Organizer: Wuhan Planning & Research and Exhibition Center
Contact information: +86 15927332351 Ms.Yang; +86 17354300581 Ms.Zhou
Consultation time: 9:00-11:30,15:00-17:30, from Monday to Friday
Address: Block A, Jianghua Complex Building, Jiang’an District, Wuhan City, Hubei Province
If you are in Florida and looking for a reliable 3D rendering service provider, you can have a look at these five projects in Florida. We believe they will give you a first impression about how 3D renders look like in the area. And also get to know the project types in Florida and how they are made.
The Sunshine State Florida spreads a welcoming blanket of white beaches and tropical warmth for all locals and visitors. It also provides a comfortable blend of the classic and cosmopolitan. Architecture in Florida is versatile in style. And in this article, we’d also like to introduce five architecture in various styles. We hope these projects could provide inspiration for you. Check them out!
Hillcrest Surfside is a 10-story residential apartment siting on the Surfside Beach. In this project, the structure and the building next to it – Surfside Seaway – need to be included in the images at the same time. For the season that they belong to the same owner, this time, we needed to create 3D renderings that went along the lighting, materials and mood with the adjacent building.
Challenging task for “AER In The District” project in Tampa, Florida. Clad in smooth stucco, this façade is joined by vertical rows of stacked balconies and floor-to-ceiling glass windows. To present this amazing façade design, we carefully added different materials and made sure the result looked perfectly harmonious at the same time.
For the interior views, we build the 3D model from the scratch based on the hand sketches from the designers. Our 3D renderings show various faces of the structure, providing a glimpse into what it’s like to live and work in this mixed-use.
In this project, we used photo-composition for the best veracity of surrounding environment. Located at the Biscayne Bay, Miami, 710 Edge Tower is a 55-story ultra-luxury mixed-use building featuring 70 residential units and more than 16,000 square feet of commercial and retail spaces. Our client used these images to report to Miami city and got it approved.
Our visuals focus on its unique fluid curves and its distinctive exoskeleton exterior design. At the same time, we highlighted the concrete framing structure with proper materials such as dark tinted laminated glass and dark grey anodized aluminum. Finally, we set the lighting based on the site photos and adjusted them to make them consistent.
Situated in Tampa, Florida, the various plans are the spotlight of the project. Being one of the merits of architectural visualization, our 3D renderings demonstrate six different designs for this project in a short turnaround time. Because this adjacent building belongs to the same owner, this structure need to match it in all aspects, such as glazing, mullions, parking slabs, columns and vegetation.
Located on the river near downtown Miami, the Riverside Wharf, will be a hospitality-driven entertainment complex and is scheduled to open to the public in 2025. Our client used our 3D renderings to report and get this project approved.
By using the CAD files provided by the client, we created the perfect 3D renderings that visual the unbuilt. Despite the tight schedule and unexpected design change, we successfully complete this project within the timeframe.
All above projects are located in Florida and our 3D renders helped architects and designers demonstrate their vision. No matter to boost the marketing or excite the reporting, 3D rendering services can help. We hope these case studies can prove our expertise and professionalism in providing 3D architectural visualization services.
The project of China Artificial Intelligence (Guangzhou) Industrial Park has been approved for construction by Tianhe District Development and Reform Bureau of Guangzhou Municipality with Guangdong Provincial Enterprise Investment Project Registration Certificate (Project Code: 2206-440106-04-01-130031). The project owner is Guangzhou New Generation Artificial Intelligence Industrial Park Management Co., Ltd., and all the construction funds are raised by the project owner. As the project has met all applicable conditions, a competition is hereby launched on the architectural design of the project.
Competition Name: International Architectural Design Competition of China Artificial Intelligence (Guangzhou) Industrial Park
China Artificial Intelligence (Guangzhou) Industrial Park is located in the Guangzhou Artificial Intelligence and Digital Economy Pilot Zone. The park aims to advance the national digital economy strategy, further integrate the digital economy with the real economy, and contribute to the development of national pilot zones of artificial intelligence and the digital economy.
The project sits around the former site of Guangzhou No.2 Cotton Mill and will be divided into two parts in its future development. The western part will be for new buildings, with a focus on fostering a digital, green, and international city and a global headquarter of artificial intelligence, digital economy, and digital culture. The eastern part, where some historical buildings (workshops) of Guangzhou No.2 Cotton Mill are preserved, will be developed into a cultural and art platform for sharing and exchanges. The goal is to make full use of the historical and cultural value of the area and unlock new vitality for the ancient city of Guangzhou. The synchronous progress of these two parts will facilitate Guangzhou to become a leader in the industrial coordination in the Guangdong-Hong Kong-Macao Greater Bay Area and a pioneer of world-class industries, while creating a valuable urban space of high quality, high capacity, and high efficiency.
The project is situated in the Guangzhou Artificial and Digital Economy Pilot Zone, downtown Guangzhou. Aside from its superior geographic location, it boasts a convenient transportation network that includes Hua’nan Expressway, Huacheng Avenue, Metro Line 5 (completed), and Line 30 (under construction). Especially, the station of Line 30 will be connected to the project underground when it is accomplished.
The project is situated in the Guangzhou Artificial and Digital Economy Pilot Zone, downtown Guangzhou. Aside from its superior geographic location, it boasts a convenient transportation network that includes Hua’nan Expressway, Huacheng Avenue, Metro Line 5 (completed), and Line 30 (under construction). Especially, the station of Line 30 will be connected to the project underground when it is accomplished.
Map of Location
The scope of the project reaches Yuancun West Street in the north, Huacheng Avenue in the south, Yuancun South Street in the east, and Hua’nan Expressway in the west. The total area is 97,173.33 square meters (within the property boundary), and the net area is 70,048 square meters (including the construction land and green space in both the western and eastern parts). Specifically, the eastern part covers 32,283 square meters, where the Bauhaus historic buildings in the core protection area need to be preserved and renovated； the west block covers 37,765 square meters, which will be the main area for new constructions.
This is an architectural design project for China Artificial Intelligence (Guangzhou) Industrial Park. The design plan should cover buildings, historical architecture renovation, public spaces, transportation systems, green landscapes, etc. within the scope of the project.
Aerial View of the Project site
The project covers a gross floor area of roughly 353,700 square meters and the budget for construction and installation fee is RMB 3.76 billion.
The detailed regulatory planning attributes of plot West 1 are Other Business Land and Commercial Land (B29B1), with the main land use functions being commercial and service support, business, and office. The gross floor area is approximately 330,500 square meters, of which 32,400 square meters are for commercial use and 298,100 square meters are for offices (including supporting residential buildings). The non-floor area (underground parking, equipment rooms, etc.) should be set up in accordance with the requirements of relevant laws and regulations and the needs of the plan.
The detailed regulatory planning attributes of plot East 1 are other business land, art and media land, and commercial land (B29B22B1), mainly to create a shared space for exchanges such as expositions, lectures, and conferences.
Plots East 2 and 3 are classified as parkland (G1), whose main functions are to increase open public space, activate the space of historic buildings, and create a small parkland with recreational functions； the total area of these two plots is 2,878 square meters. The detailed regulatory planning attributes of plots West 2 and East 4 are protective green space (G2) with a total area of 5,114 square meters. G1 and G2 are non-building plots and their landscape design should be considered as a whole with the landscape design of building plots.
The width of planned road one is 20m and the road section needs to be designed under the condition that the planned alignment remains unchanged.
Map of Project Site
Sponsor：Guangzhou New Generation Artificial Intelligence Industrial Park Management Co., Ltd.
Organizer：Guangzhou Urban Planning and Design Co., Ltd.
Agency: Guangzhou Construction Engineering Supervision Co., Ltd.
A. Competition Form
This competition will be announced on the websites of China Tendering and Bidding Public Service Platform (http://www.cebpubservice.com/), ABBS Architecture Forum (http://www.abbs.com.cn/) and Guangzhou Construction Engineering Supervision Co., Ltd.（http://www.gjjl.com/）, and the applications and registrations of domestic and foreign agencies will be publicly accepted.
This competition adopts a form of “invitation + open call”.
Through “invitation + open call”, six agencies will be selected and enter the design phase.
Invited agencies (in no particular order):
Gensler Architectural Design Firm (Shanghai) Co., Ltd. (Leader) , Guangdong Architectural Design & Research Institute Co., Ltd. (Member)
Gmp International GmbH (Leader), Guangdong Architectural Design & Research Institute Co., Ltd. (Member)
Architectural Design and Research Institute of South China University of Technology Co., Ltd. (Leader), Strabala+ architects LLC (Member)
Agencies selected by open call: Competition announcement will be published on the website, and the application is open to all domestic and foreign agencies. Experts will be organized to rank the applicants. The top three agencies will be selected as official participating agencies, and those ranking the fourth to the sixth will be selected as alternate participating agencies. If less than six agencies meet the requirements of public solicitation for the competition, sponsors can determine to extend the registration time according to the project situation.
After the release of selected agencies, if any selected agency (3 invited agencies + 3 agencies selected via open call) abandons for some reason, it will be substituted by the alternate agencies in turn.
This competition includes two stages: qualification examination and merit-based comprehensive evaluation. First, experts are organized to examine the qualifications of all the agencies and determine their qualifications. Agencies that do not meet the qualification requirements are not allowed to go through merit-based comprehensive evaluation.
The evaluation committee will comprehensively evaluate the agencies on the basis of merit, and fully discuss and compare their qualifications after a careful study of their comprehensive competences, relevant achievements, comprehensive qualities, and conceptual proposals. By means of disclosed ballot, 3 participating agencies and 3 alternate agencies will be selected by public solicitation, and the list thereof will be reported to the competition sponsors.
B. Cost Compensation
The finalists who pass the validity examination will receive a cost compensation of RMB 500,000 (about US$74,000) (including but not limited to expenses for design, product production, design research, travel incurred in coordinating the communication meeting related to the projects, design copyright, and tax), while those who fail the validity examination will not receive any cost compensation or bonus.
C. Prizes and Bonuses
One or no first prize. The first-prize winner will be awarded a detailed design contract of about RMB 30 million (about US$4,445,000) (tax included), while no other bonuses will be given. The fee for the detailed design contract shall be subject to the standards provided in the Engineering Survey and Design Fee Management Regulations (Ji Jia Ge  No. 10)； the tentative basic construction and installation fee will be RMB 3.76 billion (about US$557,212,000), and no other adjustment factors will be taken into account. The final design fee shall be adjusted according to the fee of construction and installation approved in the official reply to the estimated budget. The organizer reserves the right to leave the first prize vacant and reorganize the competition.
Two second prizes (in case of no first prize winner, three second prizes shall be granted), each receiving a bonus of RMB 1 million (about US$148,200) (tax included).
D. Payment Method
If, after evaluation, any agency that receives one or more of the compensation cost, winning bonus, and detailed design fee is a group, the competition sponsors will pay in full one or more thereof to the main account of the group, which will be redistributed by the group as per the proportion agreed in the Group Participation Agreement. The competition sponsors will not pay any additional fees to the members of the group.
The compensation cost, winning bonus, and detailed design fee of the design competition will be paid in RMB by the competition sponsors to the agencies, and any taxes incurred shall be borne by the agencies themselves. The cost compensation, bonus, and scheme integration and optimization fees will be paid in RMB to the domestic agencies in China.
Design institutions may co-own the intellectual property rights of their entries for the project with the competition sponsor. However, such design results can only be used in this project and shall not be provided to any third party for replication. In addition, sponsors have ownership of all the design results collected in this international competition. No design results will be returned to the agencies after evaluation. The agencies that submit the valid Registration Form according to the competition requirements are deemed to have agreed with all the terms and conditions herein.
E. Taxes and Fees
All income obtained by the participating institutions and their employees in China due to the performance of this contract must be paid in accordance with Chinese tax laws, and all taxes shall be borne by the participating institutions and their employees.
If the participating organization obtains income in China due to the performance of this contract, all fees that must be paid in accordance with the relevant laws, regulations and administrative rules of China, Guangdong Province and Guangzhou City shall be borne by the participating institution.
The domestic taxes and fees payable by the participating organizations can be deducted by the organizer each time the design fee is paid, and a copy of the tax receipt and payment receipt shall be sent to the participating institution.
All taxes and fees outside China arising from the performance of this contract shall be borne by the participating institutions.
Detailed Design Contract
The first prize winner of this project will be granted with a detailed design contract.
Detailed design contains: 1. Planning and professional designs (architecture, structure, landscape, decoration, curtain wall, electromechanics, intelligence, etc.)； 2. Preliminary architectural and structural design； 3. Guidance and cooperation in preliminary designs of other areas. The contractor shall give guidance to the design of construction drawings, and chief creative personnel shall be designated to give guidance on site during the process of project construction, with the cost calculated separately. The detailed design content and expenses are subject to the final detailed design contract. The design results shall meet the requirements of contents and depth of the corresponding design documents in the Regulations on the Depth of Architectural Engineering Design Document Preparation (2016 Edition) issued by the Ministry of Housing and Urban-Rural Development of the People’s Republic of China, and pass the preliminary design examination of the relevant specialties. On the basis of the above scope, the content and depth of the detailed design contract will be determined by negotiation between the competition sponsors and the winning design agency.
Announcement of the international competition and start accepting registrations from global institutions: July 26-August 22, 2022 (9:00-12:00 am, 14:00-17:00 pm, excluding holidays).
Receive the registration documents for the competition and send the competition documents: before 17:00 on August 22, 2022.
Receive conceptual proposals: before 17:00 on August 25, 2022.
Selection of participating institutions for public solicitation: late August 2022.
Notification of the selection results of the public call for participating institutions: late August 2022.
Publish the list of 6 shortlisted institutions: late August 2022.
Deadline for receiving questions for the first time: late September 2022.
Design time of the competition plan: from early September to early November 2022.
Mid-term inspection time of the competition plan: late September 2022.
Deadline for the second time to receive questions: early October 2022.
Evaluation of design results: All official participating institutions must deliver the final results of the competition to the designated place on November 4, 2022 (the specific time and place are subject to the written or email notification of the competition organizer).
Announcement of the winning scheme: The winning institution will be announced in mid-November 2022.
Note: All times are based on Beijing time, and the sponsor and organizer reserve the right to adjust the schedule.
There are no qualification requirements during the competition. If the agency granted with the detailed design contract in this competition does not have one of the following qualifications for domestic design, the agency shall unite with domestic agencies with the corresponding design qualifications before the signing of detailed design contract: a. Comprehensive Class-A Qualification for Engineering Design； Qualifications for Construction Engineering Design (Class-A in the construction industry or (Construction Engineering) Professional Class-A in the construction industry； c. Qualifications of Architecture Design Firm. There shall be no more than three agencies in a group, so that the scheme and the preliminary design will meet the relevant norms, regulations, and the requirements of administrative examination and approval departments in China and Guangzhou. Before signing a contract with the agencies to unite, the agency granted with the detailed design contract of this project shall submit the entrusted agency, the achievements of the proposed team, the relevant qualification documents, etc. to the competition sponsors for confirmation before entrusting.
Agencies applying via open call shall have relevant achievements in undertaking architectural design projects from January 1, 2017 to the deadline of registration. (Copies of contracts and other supporting documents are required. For previous achievements undertaken by a group, relevant documents shall be provided to certify that the scope of work undertaken by the group in the project meets the requirements herein. The time of achievements calculation should be the time of signing the contract.)
The leading designer must directly participate in the whole process of the competition, and personally attend the competition site to report the scheme at least twice. (If he cannot be present due to the COVID-19 travel restrictions, video reporting can be used.) The design agency shall ensure that the leading designer and the main designers participate in the design throughout the process, and that the person in charge of detailed design is just the leading designer, and may not be changed halfway. If the design agency is a group, the leading designer shall be a member of the leader of the group.
Teams applying via open call can submit the conceptual proposal required for the design tasks in this competition. For the conceptual proposal, there are no requirements for the design depth. The electronic document of the proposal (sent to the e-mail of the competition agency: rgznjs2022 @163.com before 17:00 on August 25, 2022) and AO panels (single-sided, vertical, at most two panels, punched in four corners, and sent to the competition agency before 17:00 on August 25, 2022) shall be provided. The proposal shall be written in simplified Chinese or Chinese – other language. The content of the document is subject to the Chinese text.
Note: See Annex for details.
Registration time: GMT+8 July 26-August 22, 2022. (On-site submissions will be accepted on 9:00-12:00 am, 14:00-17:00 pm,on working days； on-site submissions will not be accepted on legal holidays.)
Registration method and steps: Interested agencies shall prepare registration documents (see Annex) according to the requirements for selecting documents, and deliver or mail Registration Form （see Annex 1）, List of registered design institutions （see Annex 2）, Format of Registration Documents （see Annex 3） in written form to the competition organizer before the deadline for submission. At the same time, the electronic documents shall be sent to the e-mail of the competition agency: email@example.com. Deadline for submission: Before 17:00, August 22, 2022. If the applicant mails the registration documents, the time of submission shall be the time when the competition organizer signs for the receipt of the registration documents. The written registration documents must be delivered to the site or mailed to the receiving address before the registration deadline. If the written registration documents are delivered before the registration deadline (subject to the mail receipt record or the on-site receipt form record), the registration is successful. If the written registration documents are not delivered or mailed before the deadline due to the mailing process or for other reasons, all the consequences arising during the process shall be borne by the agency that participates in the registration.
Name of recipient: Guangzhou Construction Engineering Supervision Co., Ltd.
Receiver: Mr Li
Receiving address: Bidding Agency Department, 18F, No. 4, Guangwei Road, Yuexiu District, Guangzhou City, Guangdong Province
Requirements for Documents
The format and submission of the registration documents shall be in accordance with the requirements of Format of Registration Documents.
The agency must prepare complete registration documents and bind them into a book or more books, if necessary. The cover of each book of registration documents separately bound must be stamped with the official seal of the agency. The registration documents shall be stamped with the official seal of the participating agency on the perforation and on each page. The agency’s representative can be its legal representative or authorized representative. A valid power of attorney signed by the legal representative shall be submitted together with the registration documents signed by the authorized representative.
Note: The registration documents stipulate that the group agreement shall be stamped with the official seal of the corresponding agency by each member, and other contents in the registration documents can be only stamped and signed by the main body of the group.
The agency must bear all consequences caused by any errors or omissions in its registration documents.
All registration documents shall be made in sextuplicate (one original and five duplicates marked with “original” and “duplicate”, and the electronic documents shall be sent to the e-mail of the competition agency. In case of any consistency, the written registration documents shall prevail). If the original is inconsistent with the duplicate, the original shall prevail. The registration documents shall be formally signed by the legally authorized representative of the agency, and any changes (if any) shall be signed by the original signer. The original shall be stamped with the seal of the agency in the position marked on the format document in addition to the seal on the perforation. (For a group, only the seal of the leader is required to be stamped on the perforation.)
All registration documents shall be delivered to the full-time person in charge of the competition agency before the deadline for submission. Documents that arrive late will not be accepted. The competition agency will not take any responsibility for the damage or loss of registration documents caused by force majeure events.
All registration documents must be sealed in an envelope or package with the official seal of the agency affixed to the seal. a. The original, b. the duplicates, and c. the Registration Form of the registration documents shall be bound separately and sealed together, and the following shall be written on the cover of envelope or package:
Recipient Name: Guangzhou Construction Engineering Supervision Co., Ltd.
Name of Design Agency:
Address of Design Agency:
It cannot be opened before (deadline for submission of application documents)
Competition agency: Guangzhou Construction Engineering Supervision Co., Ltd.
Contact: Miss Xu, Miss Gan
Tel: 8620-61101333-1870, 8620-61101333-1867
Address: Bidding Agency Department, 18F, No. 4, Guangwei Road, Yuexiu District, Guangzhou City, Guangdong Province
The design competition is governed by the laws of the People’s Republic of China. The competition work and all documents shall be consistent with Chinese laws. In case of any dispute, if negotiation fails, it shall be submitted to Guangzhou Arbitration Commission for arbitration. The arbitration award is final and binding on all parties.
This project is neither an essential bidding project nor a government procurement project. The laws, regulations, rules or normative documents related to the above projects are not applicable.
No registration documents will be returned. All registration documents and design result documents for the competition shall be written in Chinese.
The agencies only own the authorship of the design result documents, and other intellectual property rights are owned by the sponsor of this design competition.
Overseas agencies must be authorized by the headquarters before participating in this competition.
To ensure the project designers’ accurate understanding of the regional background and relevant requirements in China, overseas design agencies shall be equipped with at least one person who is proficient in Chinese.
Registration of a group is accepted in this competition. There shall be no more than three agencies in a group, and the group shall submit the Group Participation Agreement as required (which shall be stamped with the official seal of the corresponding agency by each member. If an overseas participating agency has no official seal, the agreement can be signed by its legal representative or legally authorized representative.)
In case of any inconsistency between Chinese and English expressions in this announcement and its annexes, the Chinese expression shall prevail. The documents submitted by an overseas agency shall include Chinese (simplified) translations, but if the Chinese contents are inconsistent with the non-Chinese contents in the documents submitted, the simplified Chinese contents shall prevail.
Competition Name: International Design Competition of Yuexiu Fengxing National Pastoral Complex In Conghua District Guangzhou
The CPC Central Committee released a package of policies in 2018 charting the roadmap for rural vitalization，featuring thriving businesses, pleasant living environment, social etiquette and civility, effective governance and prosperity. In October of the same year, Guangzhou issued the implementation opinions of the Guangzhou Municipal People’s Government on promoting the rural vitalization Strategy, to clarify the positioning of Guangzhou as a good example and model in rural vitalization of Guangdong province, to walk out a road of rural vitalization with Guangzhou characteristics .In May 2021, the general office of the Ministry of Finance issued the notice on further improving the pilot work of National Pastoral Complex construction, on the basis of National Pastoral Complex construction pilot experience. In 2021, the central government will continue to support qualified regions to carry out the pilot construction of national pastoral complexes.Yuexiu Fengxing National Pastoral Complex In Conghua District Guangzhou is the only pastoral complex project registered by the Ministry of Finance in Guangdong Province in May 2021. The business covers modern agriculture, home accommodation, catering, intangible cultural heritage, culture and tourism, etc. The goal of the project is to realize the integrated development of primary, secondary and tertiary industries, with rural cooperatives as the key, and realize the integration of agriculture, leading agriculture and enriching farmers.
The project is located in Aotou Town, Conghua District, Guangzhou City, Guangdong Province, involving Longtan village, Hengjiang village and Wushi village. The Pajiang river passes through the three villages, adjacent to national highway 106 in the East and Guanglian Expressway in the West.Conghua district is the ecological core area in the north of Guangzhou. It takes the lead in realizing the full coverage of clean and tidy villages and beautiful and livable villages in the whole province, forming a good example of rural vitalization and characteristic towns. Aotou town is a new urbanization demonstration town in Guangdong Province and Guangzhou and a demonstration pilot town in Guangzhou. It is a major agricultural town in Conghua district and one of the five demonstration towns in Guangzhou to create high grain production. It has the development foundation for building a Rural Vitalization demonstration area.
In order to further implement the National Rural Vitalization Strategy, speed up the cultivation of new driving forces for high-quality development of rural economy, and create a National Pastoral Complex, Guangzhou Yuexiu Fengxing Pastoral Complex Co., Ltd. (Guangzhou Yuexiu Fengxing Pastoral Complex Co., Ltd. is a wholly-owned subsidiary of Guangzhou Yuexiu Group Co., Ltd.) launched the international competition for the design scheme of Yuexiu Fengxing National Pastoral complex in Conghua District, Guangzhou (hereinafter referred to as the “competition”), in order to realistically develop the village and build a demonstration area for Rural Vitalization in Guangdong.
Working range and competition content
This competition covers two levels: research area and overall design area, of which the overall design area includes two sub projects. See Annex 1 for details.
Research area：The project involves Wushi village, Hengjiang village, Longtan Village in Aotou Town, covering an area of 21.27 square kilometers. The competition content covers the overall positioning, cluster structure and regional traffic road system optimization and so on.
Overall design area
Sub project 1 is Rural architecture and landscape design:The total area is about 19.9 hectares, which is divided into three areas: Wushi Village area, Ge Village area and Xujia courtyard area, with a planning area of about 10.4 hectares, 5.8 hectares and 3.7 hectares respectively. The rural architecture and landscape design scheme should focus on the rural activation under the integration of primary, secondary and tertiary industries in the area, and put forward design strategies. The design content includes the transformation and utilization aimed at activating the operation, such as the transformation of rural Courier station, home accommodation, facade upgrading, public space upgrading, farmland and woodland activation, etc. No less than 3 key node concept designs are proposed in each area.
Sub project 2 is cultural tourism project design:the project is located in Qinglong base, Hengjiang village, Aotou town. The design area includes Huamei pasture and surrounding villages. The planned area is about 295.3 hectares, of which the core area design scope is about 106.7 hectares.The main design content needs to fully combine the operation concept and mode of the pastoral complex, build brand IP around cow IP, and innovate the design of buildings and landscapes with industrial and rural local characteristics.Through the creation of a serious of unique rural life scenes and the shaping of landmark buildings, the project creates a unique pastoral complex to achieve four new highlights of “Industrial Innovation, Environmental Renewal, Cultural Renewal and Institutional Innovation”.
Registration Qualification Required
The design organization applicants from domestic shall have the independent legal person qualification, and provide business license , not being ordered to close or being repealed. The design organization applicants from overseas must be a legally registered design institution in the place where it is located, and provide a valid registration certificate. If the person in charge of the company is the same person or different companies with holding or management relationship, it’s forbidden to sign up for the competition project at the same time. （Note: LOCATION refers to the main place where companies, enterprises or commercial institutions are registered to operate business or set up offices according to law）
Domestic applicant must have one of the following valid qualifications: (1)Construction Industry Engineering Design Qualification Class-A (2) Construction Industry (Construction Engineering) Professional Design Qualification Class-A (3)Engineering Design Integrated Qualification Class-A (4)Urban and Rural Planning Qualification Class-A (5) Landscape Professional Engineering Design Qualification Class-A (6)Tourism Planning and Design Qualification Class-A. Copies of relevant documents hould be provided with official seals.
Personal registration is not accepted in this competition(including all members of the consortium).
The design organization applicant (either party of the consortium)shall have the relevant planning (or design) achievements of Rural Vitalization or ecological town or characteristic town or cultural tourism or artistic installation from January 1, 2017 to the deadline of registration (The copy of contract and other supporting documents shall be provided. For the past performance undertaken by a consortium, relevant materials shall be provided to prove that the working contents undertaken by the company in the project meets the requirements of this item. The performance calculation time shall be subject to the contract signing time).
The General Project Leader/Chief designer must directly participate in the whole process of design activity，and personally attend the competition site to report the plan at least 2 times.The design organization applicant shall ensure the General Project Leader/Chief designer and main designers always participate in design that shall not be replaced midway.
In order to ensure that the project designers have an accurate understanding of the Chinese background and relevant requirements, the overseas design organization must have at least one person familiar with Chinese.
The application by the consortium is accepted in the competition. The number of organizations constituting the consortium shall not exceed 2. The consortium shall submit the Agreement of Consortium Participating in the Competition as required (each member of the consortium shall affix the official seal of the corresponding entity； if the overseas design organization has no seal, it can be signed by its legal representative or legal authorized representative).
Note: For detailed information, please refer to Annex 3: Collection Document ,Part two. Composition of The Application Documents, Annex 3-1 Qualification Form, Annex 4 Concept Proposal.
Based on Beijing time, 9:00-12:00 am and 14:00-17:00 PM from July 28 to August 16, 2022 ( Don’t accept the submission of materials on legal holidays).
The design organizations intending to participate in the competition MUST upload the completed application registration form and attachments (refer to Annex 2 for details) affixed with official seal to E-mail box:firstname.lastname@example.org within the specified time.
It is allowed design organizations intending to participate in the competition to apply for two sub projects at the same time, but which cannot be recommended as the participating design organization and candidates of the two sub projects at the same time. That is to say, sub project 1 will be selected first. If it has been recommended as a participating design organization in sub project 1, it will no longer participate in the selection of sub project 2.Before the selection of sub project 2, the participating design organization that have been recommended as sub project 1 shall be eliminated first, and then the participating design institutions and candidates shall be recommended in turn according to the selection rules. If the candidate of sub project 1 is selected as the participating design organization of sub peoject 2, the candidate of sub project 1 will be postponed according to the ranking after excluding the organization. If the candidate of sub project 2 is the candidate of sub project 1, the candidate of sub project 2 will also be postponed in the above-mentioned manner.
Competition Registration Documents
The design organizations intending to participate in the competition MUST send or post the completed competition application document (refer to Annex 3 and Annex 4 for details) in written form to the competition co-organizer before 17:00, Aug.16, 2022. If the design organization submits the documents by mail, the submission time shall be subject to the time when the competition co-organizer signs and receives the registration documents.
The receiving address information is as follows:
Name of recipient:Chen Yiyang
Contact phone number：020-83546050、13611455891
Address: 62nd floor, Zhujiang New Town International Financial Center, Tianhe District, Guangzhou
For different sub projects,the design organization applicant must prepare a complete application document and bind it into a volume. It can be bound in separate volumes when the content is overmuch. The cover of the registration documents bound independently shall be affixed with the official seal of the design organization applicant, and the registration documents shall be affixed with the official seal of the design organization applicant in the slit and on each page. If the overseas design institution has no official seal, it can be signed by its legal representative or legal authorized representative .The representative of the design organization applicant can be the legal representative or its authorized representative. The registration document signed by the authorized representative shall be accompanied by a valid power of attorney signed by the legal representative.
The design organizations must bear all the consequences caused by any mistake or omission in the application documents.
The registration documents are should be in quadruplicate (1 original and 3 copies, which must be marked with the words “original” and “copy” on the cover of the registration documents), and one electronic copy of the registration documents (including one document in WORD format and original paper document color scanned in PDF format ,which shall be stored in USB flash drive, without encrypted and virus). If the original is inconsistent with the copy, the original shall prevail.
The registration document shall be duly signed by a legally authorized representative of the design organization applicant and any changes, if any, shall be signed by the original signatory.
All registration documents should be delivered to the competition co-organizer before the deadline. Overdue documents will not be accepted. The co-organizer will not be responsible for the damage or loss of the registration documents caused by force majeure.
All application documents must be sealed in a sealed envelope or package with the official seal of the design organization applicant affixed to the seal. (1) the original (with official seal on the original), (2) the copy, (3) the application registration form and (4) the electronic version of the application document should be sealed separately and marked,the above contents shall be written on the cover of each envelope or package(see the selection document for details).
The written registration materials made in accordance with the registration requirements in (I) of the competition registration methods in this announcement VI must be delivered to the site or by post before the registration deadline. The written registration materials delivered before the deadline (subject to the mail signing record or the on-site signing form record) will be deemed as successful registration.
Selection of design organization
This competition adopts the method of public registration. By publishing the competition announcement on the website, it openly accepts public design organization applications from domestic and overseas..Through selection and ranking by experts,the top three design organizations in each sub project are selected as the participating organizations, and the fourth is the candidate . If there are less than 6 design organizations that meet the requirements of competition qualification, the competition sponsor may decide to extend the registration time or reorganize the registration according to the project situation. If any design organizations give up the shortlisted qualification for some reason after the shortlisted institutions confirmed and before the release of the competition documents, their competition shall be replaced in turn among the alternate design organizations until 3 are supplemented.. The competition co-organizer will send a formal invitation to the shortlisted design organizations, and the competition schemes submitted by other design organizations that have not been formally invited will not be accepted.
The selection results of the competition design organizations will be announced in mid-late August 2022.
Release of competition technical documents
The official competition technical document release meeting of the project is tentatively scheduled to be held in mid-late August 2022., and the site survey and Q &； A will be organized at the same time. The specific place and time in the invitation letter shall prevail.
Submission time of achievements
The deadline for submission of results is tentatively set for early October 2022. All design organizations must submit the final competition outcome documents to the designated place before the deadline, subject to the actual signing time.The design cycle is about 45 calendar days.
Results review method
The evaluation of the competition results includes two stages:the validity review and the scheme evaluation. The review committee of technical will first review the validity of all achievement schemes to determine the validity of achievement schemes. Results programmes that fail to pass the validity review shall not enter the scheme review.
The evaluation committee of scheme will evaluate the valid achievement scheme which pass the validity review, and select a winning scheme for each sub project by voting on the basis of careful study of the competition technical documents and full discussion and comparison.
The competition evaluation results of this project will be tentatively announced within 5 working days after the competition results evaluation meeting.
Competition expense arrangement
Competition cost compensation and bonus
If the design result is confirmed to be valid by experts,in each sub project,the third ranked design organization will receive cost compensation of seven hundred thousand RMB (￥ 700000.00), the second ranked design organization will receive cost compensation of eight hundred thousand RMB (￥ 800000.00), and the first ranked design organization will receive cost compensation of nine hundred thousand RMB (￥900000.00). The result that fails to pass the validity review will not receive cost compensation. If the scheme is evaluated by experts and finally confirmed by the organizer, the design organizations of the scheme can obtain another deepening design fee of one million RMB (￥ 1000000.00) on the basis of cost compensation.
Note: The participating unit of the consortium is regarded as a design organization.
The competition cost compensation fee and the deepening design fee are paid in RMB, the expenses shall be settled with design organization by the institution, and any taxes incurred are borne by the design organization. If the competition design organization is a consortium, it shall form a written agreement on the proportion of the consortium’s expenses within 28 days from the date of the press conference of the competition technical documents and submit it to the competition co-organizer. Those who fail to submit within the time limit will only settle all the expenses of the consortium with the main part of the consortium.
The cost compensation and deepening design fees obtained shall be paid to all signing up for the competitions in China in RMB. If the overseas design organization cannot use its own account to collect RMB, it can authorize the domestic legal independent legal person to collect the money, and the relevant handling fees, taxes and other fees shall be borne by the design organization.
The design organization whose competition design results are evaluated as invalid by the evaluation committee will not be compensated for the competition cost.
The cost compensation fee of this competition includes all expenses incurred by the design organization during this competition (including but not limited to design expenses, achievement production expenses, design research expenses, travel expenses incurred in cooperating with the holding of relevant project communication meetings, design copyright fees, relevant taxes, etc.), and no other expenses will be paid.
The competition shall be governed by the laws of the people’s Republic of China, and the competition work and all documents shall be governed by Chinese laws. In case of any dispute, if the negotiation fails, it shall be submitted to China Guangzhou International Arbitration Center for arbitration. The arbitration shall be final and binding on both parties.
In case of any discrepancy between this competition announcement and the officially released competition technical document, the officially released competition technical document shall prevail.
In case of any inconsistency between the English version and the Chinese version of the registration announcement of this competition, the Chinese version of the announcement shall prevail.
All application materials will not be returned.
The above contents or requirements are applicable to all sub projects unless otherwise specified.
If there is no special explanation for all the requirements of “company seal” in this project, the overseas design institution shall be signed by its legal representative or legal authorized representative. If the registered design organization is a consortium, the main party of the consortium shall affix the company seal in addition to the consortium entry agreement.
If the materials provided by overseas units are in foreign languages, Chinese materials notarized by qualified translation institutions or notary offices shall be provided.
The agency service fee is charged separately by sub projects. The participating design institutions that obtain the winning scheme will be charged at 3% of the sum of cost compensation fee and deepening design fee. The participating design institutions that obtain cost compensation fee will be paid at 3% of cost compensation fee, and the above payment procedures will be handled in RMB.